25ml Hydrothermal Autoclave Reactor, PTFE Liner Stainless Steel Hydrothermal Synthesis Autoclave Reactor, Vessel Kettle for Lab Hydrothermal Process

Specification:Item Type: Hydrothermal Autoclave ReactorMaterial: 304 Stainless Steel + PTFE LinerColor: As shown in the pictureMaximum Pressure: 3MpaSecurity Pressure: 2MpaMaximum Temperature: 200 ℃Security Temperature: 180 ℃Heating, Cooling Rate: 5 ℃ / minUse: External heatingCapacity: 25mlOperation Method:1. Place the synthetic reactor in the heater and raise the temperature to the required temperature ( less than the prescribed safe temperature )2. At the end of the reaction, the cooling rate should be 5c/min strictly in order to avoid damaging the reactor.3. After confirming the temperature in the kettle is lower than the boiling point of the solvent in the reactant, loosen the cover of the kettle, and then open the cover of the kettle.4. Pour the reactant into the PTFE liner and ensure that the feeding is less than 80%, and for the first time must less than 30%5. Install the kettle body correctly and tighten the kettle cover.The hydrothermal synthesis reactor is placed on a heater and heated to the desired reaction temperature (less than the required safe temperature) at the rate specified.6. When the reaction is complete, it should be cooled, and the cooling rate should be strictly followed to ensure safety and the service life of the reactor.7. When confirming that the temperature in the abdominal cavity is below the boiling point, the solvent reaction system can only open the lid after subsequent operations.Package List: 1 x Hydrothermal Autoclave Reactor(5 parts) 1 x Boost RodNote: Suggested Heater: It is recommended use a heater with programmed heating, muffle furnace is not recommended, because of temperature overshooting and temperature heating rate exceed the limit will lead to melting of the lining.

• [PTFE LINING FOR HIGH TEMPERATURE RESISTANT] The PTFE lining of this hydrothermal autoclave reactor can bear high temperature and pressure, making it ideal for scientific research and experiments.
• [WIDELY USED IN SCIENTIFIC RESEARCH] This hydrothermal synthesis reactor is commonly used in new materials, energy, and environmental engineering fields, as well as in universities and research institutions.
• [CAPABLE OF DECOMPOSING INSOLUBLE SUBSTANCES] The closed vessel design allows for the decomposition of insoluble substances, making it useful in dissolving samples for trace element determination.
• [RAPID DIGESTION OF INSOLUBLE SUBSTANCES] The reactor can achieve rapid digestion of insoluble substances using strong alkali, high temperature, and pressure environment, making it ideal for synthesis of small doses.
• [HELPFUL IN TRACE ELEMENT DETERMINATION] This hydrothermal autoclave reactor is beneficial in dissolving samples for accurate trace element analysis, providing efficient.