1/4 Inch Gas Fuel Line Kit, 2 Meter/6-Foot Fuel Hose with Clamps Valves & Magnetic Filters, Universal Filter Valve Gas Line Hose Kit for Motorcycle Tractor Snow Blower Dirt Bike

Specification:Material: Rubber, Plastic, MetalColor: Golden+Black+RedWeight: 0.45 lbHose Length: 78.74 inchesHose Inner Diameter: 0.25 inchesHose Outer Diameter: 0.44 inchesFilter Overall Length: 2.32 inchesFilter Port OD: 0.31 inchesValve Width: 1.8 inchesValve Port OD: 0.31 inchesPackage Includes: 1 Hose, 2 Filters, 10 Clamps, 1 Fuel ValveFeature: Durable, Reliable, PracticalFit Type: Universal FitWhy do you need this 1/4 inch gas fuel line kit?-Please check your engine model and part size before ordering to ensure the better fit.-The clear filter makes it easy for you to confirm the direction of the fuel flow arrow and avoid installing the filter backwards.-To avoid squeezing and deformation of the hose when installing the clamp, it is recommended to hand-tighten the hose to the connector before reinforcing the clamp with a screwdriver.

• Premium Materials: The hose in our kit is made from corrosion-resistant rubber. The filter housing and fuel valve are made from unbreakable plastic. The clamps are made from strong, heat-resistant metal that won't warp easily. So it will not break easily and will serve you well for a long time
• Protective Function: The filProtective Function: The filters capture and retain dirt and debris in the fuel, allowing relatively pure fuel to enter the gas system. They ensure safe transportation and filtration of the gas fuel system through hoses and clamps. They protect the engine inside and significantly extend engine timeters capture and retain dirt and debris in the fuel, allowing relatively pure fuel to enter the gas system. They ensure safe transportation and filtration of the gas fuel system through hoses and clamps. They protect the engine inside and significantly extend engine time
• Thoughtful Design: The filter's clear housing allows you to see buildup or wear without disassembling the system. The included magnet attracts metal debris, lowering the risk of injector clogging. The hose is secured to the filter with a clamp to ensure a fuel seal and minimize the risk of leakage
• How to Use: ​​Start by pushing the clamps over the fuel hose to the tightening point. Then securely attach one end of the hose to the fuel filter, and insert the other end with the valve attached into the tank. Finally, check that the connections are properly mated and that there are no fuel leaks
• Size Details: The kit hose has a length of 78.74 inches (2 meters) and an inside and outside diameter of 0.25 inches and 0.44 inches, respectively. The filter has a length of 2.32 inches, and the valve has a width of 1.8 inches, and both of their ports have an outside diameter of 0.31 inches